A Massive Adjustable Standing Desk From Scratch


Standing at your desk all day is healthier by far than sitting, but the commercial options tend to be expensive. [drivenbyentropy] had to contend with a heater right where the desk would go, but building an adjustable office desk to accommodate it turned out — well — gorgeous.

Two 18″ heavy duty 12 V DC actuators raise and lower the desk with a 600 lbs static load capacity and 200 lbs of  lifting load each. One actuator is actually slightly faster than the other, so instead of working out something fancy, [drivenbyentropy] simply extended the cable length on the faster actuator to disguise the difference.

Framed with some standard 2×4’s and sheathed with plywood, the massive four by eight foot desk has twelve ball-bearing drawer slides in the legs to add stability and smooth out height adjustments. Because of its size and having to build around the heating unit, the desk is stuck in the room since it does not easily come apart. There is, however, easy access to the two electronics compartments for troubleshooting!

 

[drivenbyentropy] painstakingly planed all the edges flush and stained the legs a mahogany red with polyurethane finish, while also applying seven coats of each with a final sand and smoothing coat to the desktop. After all that effort, [drivenbyentropy] has only sat at the desk a handful of times in the six months since its completion. The rest of the time it’s in standing mode!

Still, with a five week build time and $400 tab, this is an involved project. An even cheaper standing desk can be whipped up using some spare PVC piping, but if raising your desk is not an option, raise your keyboard and monitor instead.

[via /r/DIY]



Source link

Leave a Reply

Your email address will not be published. Required fields are marked *